The battery is one of the important elements in our laptop because of course if we don't have a laptop battery it will be difficult to use, especially if the place we are in doesn't have an electric plug. On the previous occasion the admin had posted Causes and Solutions for Batteries Not 100% Charged, well there is a connection on this occasion, namely when the laptop battery does not charge at all and the notification of Consider Replacing Your Battery appears.
Solution to consider replacing your battery
have you ever experienced something like that?
For those of you who have problems with the battery, you may have received the usual notification that reads consider replacing your battery error when the battery is in charge. This is usually indicated by a cross on the battery icon. Not only old batteries but this battery problem can also attack batteries that were originally normal.
Well, before knowing how to solve the problem on the battery first you must know the cause of the appearance of a cross on the battery with an error statement consider replacing your battery. The main causes of battery problems that usually occur are:
- Not updated windows system
- Incorrect maintenance on the battery or maybe you often remove the battery
- Often you install certain software that causes battery problems.
- CDC (Charge disCharge) process where you remove the charger when the battery is full and wait until the battery is low then plug the charger again.
- The battery life is indeed over. In this case you can see the report by checking the Power Efficiency Diagnostics Report about your laptop battery usage.
- Almost the same as point number 5, namely the battery wear level is very high so that the power storage capacity of the battery is already weak.
After you know some of the reasons that can cause problems with the battery, you can find out how to solve the consider replacing your battery error consider replacing your battery on your laptop so you don't need to be confused anymore when you get problems like this. Moreover, you rush to replace the laptop battery with a new one, because problems like this can be resolved easily, of course, with the following steps:
1. Charge up to 100%
This first process is quite crucial or important where the battery condition must reach the maximum point of the battery storage power itself, which is 100%. Now it should be noted that 100% here is not the battery level because there are some laptops that because the storage power has decreased so that it is only able to reach a maximum point of 90%. (see: Battery solution can't be 100%)
2. Switch off the laptop
After the battery condition is 100%, turn off the laptop while the charger is still connected.
3. Enter Safe Mode
Then the next step to solve the battery problem is to turn on your laptop and press the f8 key repeatedly until Advanced Boot Options appears then select the Safe Mode menu.
4. Let the Laptop Die
Then after entering the Windows Safe Mode system, you can unplug your laptop charger. You can let your laptop die by itself, you should not use your laptop while running this process.
5. Switch on the Laptop
The last step to solve battery problems that you need to do is reconnect the laptop charger while turning on your laptop as usual.
Actually the method above we usually call it Battery Calibration. After all the processes are complete, you can use your laptop again with normal battery conditions. Or maybe if problems like this still occur you can take it to a laptop repairman to repair your laptop quickly. But don't forget to pay attention and avoid some of the causes of battery problems that you might consciously do.
That's how to calibrate a laptop or a solution to overcome Consider Replacing Your Battery. Hopefully it will be useful for all of you.